LOGO!Power 24 V DC

Overview

Thanks to its stepped profile design, the LOGO!Power product line is ideally suited for installation in small distribution boards. The stabilized power supplies with wide-range input are available with an output voltage of 24 V in four performance classes. The 24 V versions are ideal for supplying LOGO! PLCs with the corresponding voltage input.

To further increase the 24 V availability, the LOGO!Power power supply units can be combined with DC UPS, redundancy and selectivity modules.

Product highlights

• 1-phase, 24 V DC/ 0.6 A, 1.3 A, 2.5 A and 4.0 A
• Input voltage 100 … 240 V AC (85 … 264 V), 110 … 300 V DC
• Narrow unit with width of 18 mm, 36 mm, 54 mm or 72 mm and overall depth of 53 mm in LOGO! design
• Up to 90% efficiency
• Integrated current monitor: Actual output current measurement directly at the power supply unit (for devices at least 36 mm wide)
• cULus, cURus, NEC class 2, ABS, BV, DNV GL, LRS certifications
  

Specifications

Article number		6EP3330-6SB00-0AY0	6EP3331-6SB00-0AY0	6EP3332-6SB00-0AY0	6EP3333-6SB00-0AY0
Product		LOGO!Power	LOGO!Power	LOGO!Power	LOGO!Power
Power supply, type		24 V/0.6 A	24 V/1.3 A	24 V/2.5 A	24 V/4 A
Input
type of the power supply network		1-phase AC or DC	1-phase AC or DC	1-phase AC or DC	1-phase AC or DC
supply voltage at AC
● minimum rated value		100 V	100 V	100 V	100 V
● maximum rated value		240 V	240 V	240 V	240 V
● initial value		85 V	85 V	85 V	85 V
● full-scale value		264 V	264 V	264 V	264 V
input voltage
● at DC		110 … 300 V	110 … 300 V	110 … 300 V	110 … 300 V
design of input wide range input		Yes	Yes	Yes	Yes
overvoltage overload capability		300 V AC for 1 s	300 V AC for 1 s	300 V AC for 1 s	300 V AC for 1 s
operating condition of the mains buffering		at Vin = 187 V	at Vin = 187 V	at Vin = 187 V	at Vin = 187 V
buffering time for rated value of the output current in the event of power failure minimum		40 ms	40 ms	40 ms	40 ms
operating condition of the mains buffering line frequency		at Vin = 187 V	at Vin = 187 V	at Vin = 187 V	at Vin = 187 V
● 1 rated value		50 Hz	50 Hz	50 Hz	50 Hz
● 2 rated value		60 Hz	60 Hz	60 Hz	60 Hz
line frequency		47 … 63 Hz	47 … 63 Hz	47 … 63 Hz	47 … 63 Hz
input current
● at rated input voltage 120 V		0.3 A	0.7 A	1.22 A	1.95 A
● at rated input voltage 230 V		0.2 A	0.35 A	0.66 A	0.97 A
current limitation of inrush current at 25 °C maximum		20 A	25 A	52 A	31 A
I2t value maximum		0.8 A²·s	0.8 A²·s	3 A²·s	2.5 A²·s
fuse protection type		internal	internal	internal	internal
● in the feeder		Recommended miniature circuit breaker: from 6 A characteristic B or from 2 A characteristic C	Recommended miniature circuit breaker: from 6 A characteristic B or from 2 A characteristic C	Recommended miniature circuit breaker: from 10 A characteristic B or from 6 A characteristic C	Recommended miniature circuit breaker: from 10 A characteristic B or from 6 A characteristic C
Output
voltage curve at output		Controlled, isolated DC voltage	Controlled, isolated DC voltage	Controlled, isolated DC voltage	Controlled, isolated DC voltage
output voltage at DC rated value		24 V	24 V	24 V	24 V
output voltage
● at output 1 at DC rated value		24 V	24 V	24 V	24 V
relative overall tolerance of the voltage		3 %	3 %	3 %	3 %
relative control precision of the output voltage
● on slow fluctuation of input voltage		0.1 %	0.1 %	0.1 %	0.1 %
● on slow fluctuation of ohm loading		0.1 %	0.1 %	0.1 %	0.1 %
residual ripple
● maximum		200 mV	200 mV	200 mV	200 mV
● typical		30 mV	30 mV	30 mV	30 mV
voltage peak
● maximum		300 mV	300 mV	300 mV	300 mV
● typical		50 mV	50 mV	50 mV	50 mV
adjustable output voltage			22.2 … 26.4 V	22.2 … 26.4 V	22.2 … 26.4 V
product function output voltage adjustable		No	Yes	Yes	Yes
type of output voltage setting			via potentiometer	via potentiometer	via potentiometer
display version for normal operation		Green LED for output voltage OK	Green LED for output voltage OK	Green LED for output voltage OK	Green LED for output voltage OK
behavior of the output voltage when switching on		No overshoot of Vout (soft start)	No overshoot of Vout (soft start)	No overshoot of Vout (soft start)	No overshoot of Vout (soft start)
response delay maximum		0.5 s	0.5 s	0.5 s	0.5 s
voltage increase time of the output voltage
● typical		100 ms	100 ms	100 ms	100 ms
output current
● rated value		0.6 A	1.3 A	2.5 A	4 A
● rated range		0 … 0.6 A; +55 … +70 °C: Derating 2%/K	0 … 1.3 A; +55 … +70 °C: Derating 2%/K	0 … 2.5 A; +55 … +70 °C: Derating 2%/K	0 … 4 A; +55 … +70 °C: Derating 2%/K
supplied active power typical		14.4 W	31.2 W	60 W	96 W
product feature
● bridging of equipment		No	Yes	Yes	Yes
number of parallel-switched equipment resources for increasing the power			2	2	2
Efficiency
efficiency in percent		81 %	86 %	89.6 %	89.1 %
power loss [W]
● at rated output voltage for rated value of the output current typical		3.4 W	5.1 W	7 W	11.7 W
● during no-load operation maximum		0.3 W	0.3 W	0.3 W	0.3 W
Closed-loop control
relative control precision of the output voltage with rapid fluctuation of the input voltage by +/- 15% typical		0.2 %	0.2 %	0.2 %	0.2 %
relative control precision of the output voltage at load step of resistive load 10/90/10 % typical		2 %	1 %	2 %	2 %
setting time
● load step 10 to 90% typical		1 ms	1 ms	1 ms	1 ms
● load step 90 to 10% typical		1 ms	1 ms	1 ms	1 ms
Protection and monitoring
design of the overvoltage protection		Yes, according to EN 60950-1	Yes, according to EN 60950-1	Yes, according to EN 60950-1	Yes, according to EN 60950-1
● typical		0.8 A	1.7 A	3.2 A	5 A
property of the output short-circuit proof		Yes	Yes	Yes	Yes
design of short-circuit protection		Constant current characteristic	Constant current characteristic	Constant current characteristic	Constant current characteristic
enduring short circuit current RMS value
● maximum		0.8 A	1.7 A	3.2 A	5 A
overcurrent overload capability in normal operation		overload capability 150% Iout rated typ. 200 ms	overload capability 150% Iout rated typ. 200 ms	overload capability 150% Iout rated typ. 200 ms	overload capability 150% Iout rated typ. 200 ms
display version for overload and short circuit		–	–	–	–
measuring point for output current			50 mV =^ 1.3 A	50 mV =^ 2.5 A	50 mV =^ 4 A
overcurrent overload capability when switching on		150% Iout rated typ. 200 ms	150% Iout rated typ. 200 ms	150% Iout rated typ. 200 ms	150% Iout rated typ. 200 ms
Safety
galvanic isolation between input and output		Yes	Yes	Yes	Yes
galvanic isolation		Safety extra-low output voltage Uout acc. to EN 60950-1 and EN 50178	Safety extra-low output voltage Uout acc. to EN 60950-1 and EN 50178	Safety extra-low output voltage Uout acc. to EN 60950-1 and EN 50178	Safety extra-low output voltage Uout acc. to EN 60950-1 and EN 50178
operating resource protection class		Class II (without protective conductor)	Class II (without protective conductor)	Class II (without protective conductor)	Class II (without protective conductor)
protection class IP		IP20	IP20	IP20	IP20
Approvals
certificate of suitability
● CE marking		Yes	Yes	Yes	Yes
● UL approval		Yes; cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259; cURus-Recognized (UL 60950, CSA C22.2 No. 60950), File E151273, NEC class 2 (acc. to UL 1310)	Yes; cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259; cURus-Recognized (UL 60950, CSA C22.2 No. 60950), File E151273, NEC class 2 (acc. to UL 1310)	Yes; cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259; cURus-Recognized (UL 60950, CSA C22.2 No. 60950), File E151273, NEC class 2 (acc. to UL 1310)	Yes; cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259; cURus-Recognized (UL 60950, CSA C22.2 No. 60950), File E151273
● CSA approval		Yes; cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259; cURus-Recognized (UL 60950, CSA C22.2 No. 60950), File E151273, NEC class 2 (acc. to UL 1310)	Yes; cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259; cURus-Recognized (UL 60950, CSA C22.2 No. 60950), File E151273, NEC class 2 (acc. to UL 1310)	Yes; cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259; cURus-Recognized (UL 60950, CSA C22.2 No. 60950), File E151273, NEC class 2 (acc. to UL 1310)	Yes; cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259; cURus-Recognized (UL 60950, CSA C22.2 No. 60950), File E151273
● cCSAus, Class 1, Division 2		No	No	No	No
● ATEX		No	No	No	No
certificate of suitability
● IECEx		No	No	No	No
● NEC Class 2		Yes	Yes	Yes	No
● ULhazloc approval		No	No	No	No
● FM registration		No	No	No	No
type of certification CB-certificate		Yes	Yes	Yes	Yes
certificate of suitability
● EAC approval		Yes	Yes	Yes	Yes
certificate of suitability shipbuilding approval		Yes	Yes	Yes	Yes
shipbuilding approval		ABS, BV, DNV GL, LRS	ABS, BV, DNV GL, LRS	ABS, BV, DNV GL, LRS	ABS, BV, DNV GL, LRS
Marine classification association
● American Bureau of Shipping Europe Ltd. (ABS)		Yes	Yes	Yes	Yes
● French marine classification society (BV)		Yes	Yes	Yes	Yes
● DNV GL		Yes	Yes	Yes	Yes
● Lloyds Register of Shipping (LRS)		Yes	Yes	Yes	Yes
● Nippon Kaiji Kyokai (NK)		No	No	No	No
EMC
standard
● for emitted interference		EN 55022 Class B	EN 55022 Class B	EN 55022 Class B	EN 55022 Class B
● for mains harmonics limitation		not applicable	not applicable	not applicable	EN 61000-3-2
● for interference immunity		EN 61000-6-2	EN 61000-6-2	EN 61000-6-2	EN 61000-6-2
environmental conditions
ambient temperature
● during operation		-25 … +70 °C; with natural convection	-25 … +70 °C; with natural convection	-25 … +70 °C; with natural convection	-25 … +70 °C; with natural convection
● during transport		-40 … +85 °C	-40 … +85 °C	-40 … +85 °C	-40 … +85 °C
● during storage		-40 … +85 °C	-40 … +85 °C	-40 … +85 °C	-40 … +85 °C
environmental category according to IEC 60721		Climate class 3K3, 5 … 95% no condensation	Climate class 3K3, 5 … 95% no condensation	Climate class 3K3, 5 … 95% no condensation	Climate class 3K3, 5 … 95% no condensation
Mechanics
type of electrical connection		screw-type terminals	screw-type terminals	screw-type terminals	screw-type terminals
● at input		L, N: 1 screw terminal each for 0.5 … 2.5 mm2 single-core/finely stranded	L, N: 1 screw terminal each for 0.5 … 2.5 mm2 single-core/finely stranded	L, N: 1 screw terminal each for 0.5 … 2.5 mm2 single-core/finely stranded	L, N: 1 screw terminal each for 0.5 … 2.5 mm2 single-core/finely stranded
● at output		+, -: 1 screw terminal each for 0.5 … 2.5 mm²	+, -: 1 screw terminal each for 0.5 … 2.5 mm²	+, -: 1 screw terminal each for 0.5 … 2.5 mm²	+, -: 1 screw terminal each for 0.5 … 2.5 mm²
● for auxiliary contacts		–	–	–	–
width of the enclosure		18 mm	36 mm	54 mm	72 mm
height of the enclosure		90 mm	90 mm	90 mm	90 mm
depth of the enclosure		53 mm	53 mm	53 mm	53 mm
required spacing
● top		20 mm	20 mm	20 mm	20 mm
● bottom		20 mm	20 mm	20 mm	20 mm
● left		0 mm	0 mm	0 mm	0 mm
● right		0 mm	0 mm	0 mm	0 mm
net weight		0.07 kg	0.12 kg	0.2 kg	0.29 kg
product feature of the enclosure housing can be lined up		Yes	Yes	Yes	Yes
fastening method		Snaps onto DIN rail EN 60715 35×7.5/15, direct mounting in different mounting positions	Snaps onto DIN rail EN 60715 35×7.5/15, direct mounting in different mounting positions	Snaps onto DIN rail EN 60715 35×7.5/15, direct mounting in different mounting positions	Snaps onto DIN rail EN 60715 35×7.5/15, direct mounting in different mounting positions
MTBF at 40 °C		4 415 040 h	3 094 996 h	2 864 520 h	2 391 480 h
other information		Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified)	Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified)	Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified)	Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified)