IBCON - ADVANTECH - ASUS IoT - Siemens - Qlight คอมพิวเตอร์อุตสาหกรรม สัญญาณไฟเตือน LED

0-2540-2299

Home
About Us
Products
- ADVANTECH
- PATLITE
- PLite
- SIEMENS
- ASUS IoT
Search
- ADVANTECH
- PATLITE
Support
Blog
Recruitment
Terms
Contact

Our Products

Products > Advantech > Remote I/O&Wireless Sensing Modules > Analog I/O Modules

ADAM-6022

6AI/2AO/2DI/2DO Ethernet PID Module

Main Features

2 loop PID control algorithms built in one package
3 analog input/1 analog output/1 digital input/1digital alarm output for 1 PID loop
Support multiple analog I/O ranges: 0 ~ 10 VDC, 0 ~ 20 mA and 4 ~ 20 mA
Support heating/cooling (direct/reverse) action mode
Support loop open/close (PID disable/enable) and analog output manual control modes
Watchdog timer to recover the system

Introduction

Advantech’s ADAM-6022 is an Ethernet-enabled dual-loop PID controller for general purposed PID control applications. A user-friendly utility software is included for users to set PID parameters (Pv, Mv, & Sv). Through the integrated web page, users can monitor and change the control set point through the Internet via web browser. The ADAM-6022 also supports MODBUS/TCP protocol. HMI software can easily access this module to monitor the I/O data and change the control parameters.

Specifications
PartNumber	ADAM-6022-A1E
Analog Input
Channels	6
Input Range	±10 V, 0~20 mA, 4~20 mA
lnput Type	V, mA
Resolution(Bits)	16-bit
Sampling Rates(S/s)	10 S/s (sum)
Analog Output
Channels	2
Output Ranges	0~10 V, 4~20 mA, 0~20 mA
Output Type	V, mA
Resolution	12-bit
Communications
Interface	Ethernet
Environment
Isolation Voltage	2,000 VDC
Operating Temperature	-10~50 °C (14~122 °F)
General
Connectors	1 x RJ45, 1 x 13-pin plug-in screw terminal, 1 x 9-pin plug-in screw terminal
Protocol	Modbus/TCP, TCP/IP, UDP, HTTP, DHCP
Isolated Digital Input
Channels	2
Input Voltage	Dry Contact Logic level 0: close to GND Logic level 1: open Wet Contact Logic level 1: 10~30 VDC Logic level 0: 0~3 VDC
Isolated Digital Output
Channels	2
Output Type	Sink
Output Voltage	0~30 VDC
Sink Current	100 mA max./channel
Power Requirements
Input Voltage	10~30 VDC