IBCON - ADVANTECH - ASUS IoT - Siemens - Qlight คอมพิวเตอร์อุตสาหกรรม สัญญาณไฟเตือน LED

0-2540-2299

Home
About Us
Products
- ADVANTECH
- PATLITE
- PLite
- SIEMENS
- ASUS IoT
Search
- ADVANTECH
- PATLITE
Support
Blog
Recruitment
Terms
Contact

Our Products

Products > Advantech > Automation Controllers & I/Os > Programmable Automation Controllers & I/O Modules > Control IPC: APAX-5000 Series > Digital I/O Modules

APAX-5080

4/8-ch High/Low Speed Counter Module

Main Features

Supports multiple operating modes: (1) Up mode (2) Up/Down mode (3) Pulse/Direction mode (4) A/B Phase mode (5) Frequency mode
4 or 8 counter channels depends on operating modes
32-bit counter range with 1 bit overflow/underflow
1 MHz counter frequency
4 digital input channels with counter gate functionality
4 digital output channels with counter alarm output functionality
Over voltage, short circuit and thermal protection design
2500 VDC isolation protection (between channels and backplane)

Introduction

Advantech’s APAX-5080 Counter Module features up to eight channels and hot-swappable functionality. With its 4/8 counter channels, the APAX-5080 is capable of simultaneously taking counts from multiple sources using any of its five operating modes ( UP, UP/Down, Frequency, Pulse/Direction, and A/B Phase modes), therefore saving hardware installation costs and having greater scalability. The flexibility of the APAX-5080 is enhanced with the additional benefit of four DI counter gates to define when a counter is enabled, and four DO alarm output channels triggered by a specific counter value; so that the APAX-5080 can be configured to send an alarm message when certain criteria are met.

Specifications
Part Number		APAX-5080-AE
General	Power Consumption	2.5 W @ 24 VDC (typical)
	Certifications	CE, FCC class A
	Weight	170 g
	Dimensions	30 x 139 x 100 mm
	Enclosure Housing	ABS+PC
	Status Display	LED per channel (for DI, DO channel)
Digital Input	Channles	4
	Input Voltage	For "0" signal: 0 ~ 3 VDC, For "1" signal: 10 ~ 30 VDC
	Type	Source Load
Digital Output	Channles	4 (Sink Type)
	Output Voltage Range	8 ~ 35 VDC
	Rated Output Current	0.5 A (per channel)
Environment	Temperature (Operating)	-10 ~ 60° C (when mounted vertically)
	Temperature (Storage)	-40 ~ 70°C
	Relative Humidity	5 ~ 95% (non-condensing)
Counter/Frequency Input	Channels and Mode	8 (Up and Frequency mode), 4 (Pulse/Direction, Up/Down, A/B phase mode)
	Counting Range	32-bit + 1-bit overflow/ underflow
	Minimum Pulse Width	1 µs
	Counter Frequency	1 MHz (max.)
	Input Voltage	For "0" signal: 0 ~ 3 VDC, For "1" signal: 10 ~ 30 VDC