IBCON - ADVANTECH - ASUS IoT - Siemens - Qlight คอมพิวเตอร์อุตสาหกรรม สัญญาณไฟเตือน LED

0-2540-2299

Home
About Us
Products
- ADVANTECH
- PATLITE
- PLite
- SIEMENS
- ASUS IoT
Search
- ADVANTECH
- PATLITE
Support
Blog
Recruitment
Terms
Contact

Our Products

Products > Advantech > Machine Automation

PCI-1285E

Economic DSP-based 4/8-axis Stepping and Servo Motor Control Universal PCI Card

Main Features

Encoder input is 10 MHz for 4xAB mode, 2.5 MHz for CW/CCW mode
Pulse output up to 5 Mpps
Memory buffer for trajectory planning (circular trajectory and auto blending are not supported)
Supports E-Gear (only for PCI-1245E)
Hardware emergency input
Watchdog timer
Position latch via ORG & index signal
Programmable interrupt
RDY/LTC-dedicated input channels & SVON/CMP/CAM-DO/ERC-dedicated output channels are switchable for general input and output purposes

Introduction

PCI-1245E/1285E is a 4/8-axis economic universal PCI (supporting both 3.3 V and 5 V signal slot) stepping/pulse-type servo motor control card designed for entry-level applications which need to control linear interpolation, electronic gear, continuous contouring (circular trajectories and auto blending are excluded). PCI-1245E/1285E utilizes the high-performance DSP and FPGA to calculate the motion trajectories, synchronization timing control for multiple axes and input/output handling to offer functionality, such as 2~8-axis linear interpolation, E-Gear (only for PCI-1245E), T/S-curve acceleration/deceleration rate, speed override, 16 home modes and so on. In addition, Advantech supplies a Common Motion API library, graphical utility and user-friendly examples to decrease programming load, helping users complete configuration and diagnosis easily.

Specifications
Part Number		PCI-1285E-AE
Pulse Type Motion Control	General Digital I/O	32-ch DI, 32-ch DO
	Machine Interfaces	LMT+, LMT-, ORG
	Max. Output Speed	5 Mbps
	Number of Axis	8
	Position Counters	Range of command and actual position
	Pulse Output Type	Pulse/direction (1-pulse, 1-direction type) or CW/CCW (2-pulse type)
	Servo Driver Interfaces	ALM, INP
	Step Count Range	±2, 147, 483, 646
	Velocity Profiles	T-Curve, S-Curve
General	Power Consumption	Typical: 5 V @ 530 mA 3.3 V @ 160 mA; Max.: 5 V @ 500 mA 3.3 V @ 1 A
	Connector	2 x 100-pin mini-SCSI female connector
	Temperature (Operating)	0 ~ 60°C (32 ~ 140°F)
	Humidity	5 ~ 95% RH, non-condensing (IEC 68-2-3)
	Bus	Universal PCI V2.2
	Temperature (Storage)	-20 ~ 85°C (-4 ~ 185°F)
	Dimensions	175 x 100 (6.9" x 3.9")
Encoder Interface	Isolation Protection	2,500 VDC
	Input Range	5 ~ 10 V
	Input Type	Quadrature (A/B phase) or up/down
	Max. Input Frequency	10 MHz under 4xAB mode
Pulse Type Motion Control	Motor Driver Support	Pulse-type servo/stepping
Pulse Type Motion Control	Interpolation	2 to 8-axis linear